Hydroponic Vertical Tower

This is a vertical tower for hydroponic. This one is made from a 4inch ABS tube (99,75mm ID x 114,15mm OD) but I recommend you to use PVC. The cups and the holders are a tight fit so the cups won't come off the holders. Those holders are 30 deg angle. For the holes in the ABS tube, I cut them with a 2.5inch hole saw. For water coming on top, I use the one below with a flexible tube. For the foot it's a conic one so more the tube goes down, more it's tight and you'll probably have to sand it to fit at your height

Water Pump: https://www.amazon.ca/-/fr/Pawfly-Submersible-Fountain-Aquarium-Hydroponic/dp/B01NBPCVW3/ref=sr_1_4?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2WZ53EVKHM9H4&keywords=hydroponic+pump&qid=1590018910&sprefix=hydroponic+pum%2Caps%2C162&sr=8-4

2.5inch hole saw: https://www.amazon.ca/-/fr/cloche-bi-m%C3%A9tal-vitesse-arbor%C3%A9e-1772954/dp/B004YK5DHW/ref=sr_1_3?__mk_fr_CA=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=2.5inch+hole+saw&qid=1590018944&sr=8-3

Descrição