Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Walking ATAT por Cana759 no Thingiverse

Descrição

Walking ATAT Automata. While fighting the boredom of the Covid 19 crap, I turned to the dark side to design something to keep me from buying a bunch of crap on amazon. I designed this with that in mind, everything can be printed for this assembly with the exception of 20 7/16 washers that are used as weights. I printed everything with PLA with the exception of the 2 timing belts of which i used TPU. This is a pretty time consuming print that will take about 4 days and 21 hours. The assembly drawings are attached along with a BOM (bill of materials). Super Glue is required for assembly in certain places. I can't take credit for body upper, head or snow speeder, those were remixed for this project. Unfortunately I dont remember where I downloaded them from. Happy printing and May the force be with you.

Thingiverse

Walking ATAT

Cana759 Cana759 (abre em nova aba)
259
Curtidas
0
Downloads
411
Coleções
1
Impressões
Licença Creative Commons - Attribution
Arquivos (46)
ATAT_Body_Push_Pin.STL 116.5 KB
ATAT_Base_Plate_Lower.STL 270 KB
ATAT_Drive_Gear_4.STL 118 KB
ATAT_Drive_Gear_1.STL 303.1 KB
ATAT_Driveshaft_2.STL 1.4 KB
ATAT_Body_Lower.STL 329.1 KB
ATAT_Body_Support_Bracket.STL 80.9 KB
ATAT_Body_Upper.STL 367.9 KB
ATAT_Drive_Gear_5_retainer.STL 37.9 KB
ATAT_Leg_Joint_2.STL 17.3 KB
ATAT_Head.STL 148 KB
ATAT_Foot_1.STL 159.2 KB
ATAT_Idler_Shaft.STL 35.1 KB
ATAT_Foot_Lifter_extension.STL 386.6 KB
ATAT_GearBox.STL 435.2 KB
ATAT_Driveshaft_1.STL 1.4 KB
ATAT_Lifter_Idler.STL 327.8 KB
ATAT_Foot_2.STL 574 KB
ATAT_neck_washer.STL 21.6 KB
ATAT_Push_Pin_Retainer.STL 15.3 KB
ATAT_Lifter_Gear.STL 648.8 KB
ATAT_Handle.STL 354.1 KB
ATAT_Snow_speeder_arm.STL 6.5 KB
ATAT_Push_Pin.STL 130.3 KB
ATAT_Shaft_Coupler.STL 21.2 KB
ATAT_support.STL 2.2 KB
ATAT_Leg_Joint_1.STL 17.3 KB
ATAT_Lower_Leg_1.STL 298.7 KB
ATAT_Lifter_Pulley.STL 326.6 KB
ATAT_Lifter.STL 31.9 KB
ATAT_Drive_Gear_5.STL 784.3 KB
ATAT_Head_Gear_1.STL 108 KB
ATAT_Upper_Leg_1.STL 91.8 KB
ATAT_Upper_Leg_2.STL 125.7 KB
ATAT_Drive_Gear_2.STL 933.8 KB
ATAT_Lifter_Shaft.STL 18.3 KB
ATAT_Snow_speeder.STL 137 KB
ATAT_V_Roller.STL 207.9 KB
ATAT_Neck.STL 184.1 KB
ATAT_Lower_Leg_2.STL 310.6 KB
ATAT_Drive_Gear_3.STL 691.2 KB
ATAT_Timing_Belt.STL 417.3 KB
ATAT_Base_Plate_Upper.STL 1.6 MB
ATAT_ring_gear.STL 1.4 MB
Bearing_608.STL 9.1 MB
ATAT_Head_Gear_2.STL 107.1 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora