Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
https://www.thingiverse.com/thing:4245334/files
[ CV19_Frame_Brim_CLIP_FIT_3-31+Hole2.stl ] Increased strength. It looks hot and humid, so I made a hole.
[ CV19_Frame_Brim_CLIP_FIT_3-31+Hole_ALLINONE2.stl ] Increased strength. Data for mass production. A4 size, OHP and PPC transparent film are recommended. Since it is difficult to see the inkjet type, it is better not to use it.
[ Left_Arm_4-16-m.stl ] [ Right_Arm_4-16-m.stl ] The method of attaching the transparent sheet has been improved from the original. Bend the edge of the transparent sheet 5 mm and attach it. The file name was swapped between left and right, so I fixed it.
[ Re_CLIP.stl ] I fixed it because the clip was in the opposite direction. The Z axis was rotated 45 degrees. Waste of print space. It is a clip rewritten from scratch. Compatible with the original clip. Excellent for fixing film.
[ CV19_Frame_Brim_CLIP2+INSERT2.stl ] Data for mass production. The contents are two clips and two inserts. Reduced for a 140 mm square bed.
[ clip_massProduction.stl ] Data for mass production. only the CLIPs.
[ clip_massProduction_S.stl ] Data for mass production. only the CLIPs. Reduced for a 140 mm square bed.
[ arms_massProduction.stl ] Data for mass production. only the ARMs. Protect your hands with gloves when removing the support.
[ frames_massProduction.stl ] Data for mass production. only the FRAMEs. This data should not be vertically stacked. It is difficult to remove the support.
