Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D micro marble track compatible por Jooxoe3i no Thingiverse

Descrição

a lego-compatible micro-marble-track construction system :-)

designed for small ball-bearings, with a diameter less than 6mm = the track diameter. for best results look for ones with 4.8mm diameter - the lego-stud diameter :-)

(standard 608 bearings contain some which are slightly smaller, but still in the right ballpark - got any unused fidget-spinners around?)

the Micro Marble Track system:

Print Settings

Rafts: No

Supports: No

Resolution: 0.15

Notes:

designed to print without any supports - might need a brim for bed-adhesion, since the bottom faces have not a lot of area to them - the "notch" in the bottom cavity that connects to the lego-studs should help align the bridges which will form the ceiling

Thingiverse

micro marble track compatible

Jooxoe3i

24

Curtidas

0

Downloads

30

Coleções

Licença Creative Commons - Attribution

Arquivos (15)

lmmt_marble-track-collector_funnel_000.stl 62.6 KB

lmmt_marble-track-drop_004.stl 29 KB

lmmt_marble-track-slope4_000.stl 35 KB

lmmt_marble-track-reverse2x2_000.stl 69.6 KB

lmmt_marble-track-straight4_000.stl 21.6 KB

lmmt_marble-track-spiral2x2_360_000.stl 124 KB

lmmt_marble-track-spiral2x2_270_001.stl 99.6 KB

lmmt_marble-track-slope4_001.stl 24.1 KB

lmmt_marble-track-corner2x2_000.stl 42.7 KB

lmmt_marble-track-otherSideDouble2x2_000.stl 90.6 KB

lmmt_marble-track-zigzag_drop_right_000.stl 97.5 KB

lmmt_marble-track-pool2x2_000.stl 55.7 KB

lmmt_marble-track-spiral_drop_left_000.stl 113.3 KB

lmmt_marble-track-otherSide2x2_000.stl 53.7 KB

lmmt_marble-track-slope_sidestart_000.stl 45 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.