Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Sci-Fi inspired Raspberry Pi 4 case.
This case design was based on the 3d art of LoneWolf3d (https://www.artstation.com/artwork/xNnOO)
The case currently has 2 versions.
A) holds one Pi 4, two 3.5 inch hard drives, and one 120mm fan. B) holds three Pi 4's, three 3.5 inch hard drives, and one 120mm fan
Configuration A could be used to house a NAS
Configuration B could be used to house a PI cluster
Assembly is not too bad but in configuration "B" there is not much extra room.
I tried to remove extra material to reduce print time and plastic usage.
Print all the parts tagged for your configuration (A or B) and all the untagged parts
BOM:
| count | item | L min | L max |
|---|---|---|---|
| 8 | M4 Socket Cap | 40 | 45 |
| 8 | M4-Nut | ----- | ----- |
| 4~12 | #6-32 UNC | 4 | 6 |
| 4-12 | M3 | 4 | 7 |
| 8 | M3 Optional | 10 | 15 |
| 8 | M3-Nut Optional | ||
| 1-3 | 5V/3A dc/dc converter | ----- | ----- |
| 1-3 | Sata to USB3 w/ 12V power | ||
| 1 | 120mm fan | ||
| ? | resistors for fan Optional | ||
| 1-3 | Cat-6 Keystone jack | ||
| 1 | DC Power Connector FC681493 | ||
| 2 | M2 | 4 | 7 |
| ? | Cat 5e/6 cable |
The only part that needs support is the bottom mount for two RPI's
If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy!
