source_v

Open Source FPV Drone Frame project initiated by Team BlackSheep

About SOURCE V

The idea

The SOURCE V is a continuation of the SOURCE frame line initiated by Team BlackSheep. It seeks to perfect the vertical, ultra-stiff and low drag racing frame for drone racers.

The frame is donated to the community to empower creators and makers, and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame to compete in an increasingly competitive marketplace.

Frame specifications

• Wheelbase 5": 218mm
• Top Plate: 2mm
• Bottom Plate: 2mm
• Standoff height: M3x30mm
• Arm thickness 5": 2x12mm
• Stack Mounting: 30.5 × 30.5mm & 20 x 20
• Weight 5": 63g

Hardware

• 4x Standoffs M3x30mm
• 24x M3x14mm

This Thingiverse

I converted all needed files to the .stl format, so that you can create your own 3D printed version of the frame (i´m using it for test fitting and further improvement before cutting it out of carbon)

##--Edit-- What you need to print

• 2 x MOTOR-PLATE-BACK-LEFT.stl
• 2 x MOTOR-PLATE-BACK-RIGHT.stl
• 2 x MOTOR-PLATE-FRONT-LEFT.stl
• 2 x MOTOR-PLATE-FRONT-RIGHT.stl
• 1 x BOTTOM-PLATE.stl
• 1 x TOPPLATE.stl
• 1 x ST-PLATE-BACK.stl
• 1 x ST-PLATE-FRONT.stl
• 1 x ST-PLATE-LEFT.stl
• 1 x ST-PLATE-RIGHT.stl
• Source V-01-ARM-Back-L.stl
• Source V-01-ARM-Back-R.stl
• Source V-01-ARM-Front-L.stl
• Source V-01-ARM-Front-R.stl

Update

• After a request, i´ve added the .dxf and .step files
• After a comment, i checket the length of the arms, which are, as stated, not all the same. So i´ve added / changed the files