www.the-x-cube.com

The X-Cube: the next generation, shape-shifting, twisting logic-puzzle.

An open-source puzzle that adds 32 extra pieces, four extra layers, and a shape changing element to the original 3x3x3 Rubik's Cube.

Originally created on a uPrint Plus in December, 2012. Mass production funded on Kickstarter July 2013.

Also available on Amazon

Additional materials:

• 6: M3-.5 x16 screws
• 2 to 3: Compression springs from clicking pens
• 3x3x3 Stickers: http://cubesmith.com/3x3x3.htm
• Recommended: CRC Heavy duty Silicone Spray, or equivalent puzzle lubricant. MUST SPECIFY IT IS SAFE FOR PLASTIC. (http://imgur.com/uraguGB)

1. Print parts (See ReadMe.txt)
2. Assembly instructions found here: http://imgur.com/a/j25Fl
3. "Break in" the X-Cube for 30 minutes to an hour by twisting layers until they wear in and become easier to turn.
4. Apply CRC Silicone Spray to inside of puzzle. Take out a few pieces to do this.
5. Continue to twist layers to distribute the CRC throughout your X-Cube.
6. Apply stickers (available at http://cubesmith.com/X-Cube.htm)