#CROBE - RC GLIDER Small picheron slope soarer based on original design (balsa made) designed by Franck Aguerre, described here : http://lecrobe.free.fr

##REQUIREMENTS

• two servos like D05010 / DSM44
• Lipo 1S 300 - 400mAh
• tiny receiver
• main carbon rod diam. 3mm
• 1.5mm balsa for elevator
• small parts (pvc tube 2/1mm, steel rod diam 0.8mm...)
• RTF weight : 109g

##PRINT

• Around 80-90g of PLA+
• Layer height : 0.2mm (Fuselage - Wings) and 0.15mm for canopy
• No support required, just some brim.
• No infill
• One 0.4mm wall
• Max height for printer : 170mm
• Layer 0.12mm and line width 0.3mm for 'Light' versions of wings.
• 'flat' wing means without dihedral, like original balsa's Crobe.

##RC settings

• Delta mixer
• Elevator function: +/-6mm (measured at trailing edge / wing root)
• Aileron function: +/-4mm
• CG : Balanced with fingers located on both pvc tube (used to maintain wing with rubber band).

##UPDATES

• 24/03/2020 : Initial upload (v0.1)
• 25/03/2020 : Small fix for Part3 - Add flat wing version (like original)
• 27/03/2020 : Maiden flight - Flat and Light wing versions - Small fixes
• 28/03/2020 : Updated canopy
• 13/08/2020 : Canopy with lock - Removable stabilizer with screws (v0.11)
• 19/09/2020 : Fuselage part1 (v0.11) with reinforcement against wing punching