Sub-divide your junk drawers into more manageable boxes.

This thingiverse object is customizable.

Measure the width of your junk drawer, and divide it down into half or third or fourths (round down).

For example, a narrow drawer that is 191mm wide breaks up nicely into a 95mm boxes. A wider drawer that is 403mm wide breaks up nicely into 100mm boxes. These values are the BOX XY. The height of the box is the BOX Z, which should obviously be configured short enough to fit entirely within the drawer.

This STL will then be a set of boxes which fit into that space in a re-orderable way:

• plain single box
• double-wide box
• big box (double-wide and double-tall)
• halved box (single box with a divider)
• quartered box (single box with dividers in both directions)

Each of the boxes will have even multiples of the given dimension on their exterior, and as such will tile together evenly.

Split the STL into objects, and then select which objects you'd like to print (and of course which will fit on your build plate).

The default wall thickness and fillet radius works for light objects. If you're storing heavy stuff, consider bumping the thickness and fillet radius up to compensate in strength.