With the newest releases to the Warcry gaming system I decided to revamp my original warcry enclosure. Make it a little more generic an eliminate some of the limitations of the earlier project.

The enclosure is designed to be modular, with two box designs; 60mm and 100mm box for various size models. I've also included an expansion ring to incrementally raise the size of the box.

To facilitate printing the box I removed the lip and provided a stacking ring that allows boxes to be mounted on top of one another, and the card tray sits over the box rather that inserting into the box.

The lid, no longer has the warcry logo this was to allow the boxes to be used for different modeling systems. There is an indent in the top of the lid to take a warcry totum https://www.thingiverse.com/thing:4183672

The box has no bottom except for a lip around the bottom, This feature evolved around the need to store the figures in a cabinet and only put them in boxes to move them to new venues for games. To this end I designed a magnetic card tray which sits in the bottom of the enclosure but can be removed and replaced at will https://www.thingiverse.com/thing:4183678

I'll be publishing some pictures soon.

Just added a couple new files, both are card tray insterts, both have been increased to 67 x92 to hold cards in sleeves. One has straight corners and the other rounded corners.