Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is my 3D printed and laser cut custom NAS server case ! The case is composed of a 3D printed structure that hold the laser cut parts made with acrylic. It can fit up to an ATX motherboard (compatible w/ mATX and ITX), an ATX power supply and up to 6 3,5" HDDs. Plus 2 120mm fan openings on the front and 1 on the rear. I've also designed a SATA backplane to facilitate cable routing : https://hackaday.io/project/170458-backplane-for-diy-nas
To assemble the case you need : 14 M3 x19mm screws 8 6mm spacers for the side panels some 6mm spacers for the motherboard some M3 nuts (to maintain the spacers) 1 16mm momentary switch
