This is a 'remix' of some of the Prusa Mini parts to match what I had at the time, I have mostly modified parts from the original prusa mini (https://github.com/prusa3d/Original-Prusa-MINI) - full credit goes to the team at prusa for making such a nice design.

The things I changed were as follows:

• Added 8mm holes in everything that joins to the 3030 (I have Rexroth 3030, not OpenBeam), that's the front and rear Y plates as well as the top and bottom Z ones. I also had a print failure on the rear Z piece so I made just the motor mount separate in case I wanted to bolt that on.
• Merged the presumably metal bit that holds the Z axis up because I didn't have one.
• Made new holes in the Z axis for a 'standard' TR8 nut (mod1 the m3s screw directly into the plastic, the other version I have modified Prusa's nut captive bit)
• Designed a mount for an E3D hotend to go to the original X carriage (with an inductive sensor)
• Designed a mount for a Z endstop (for safety)
• Designed a spool holder that mounts to 3030, one of those prints failed so I made a female version which currently holds my spool (stiffened with inspiration from the Prusa team!)
• Designed a 3030 motor mount for my extruder

I think that's everything, hopefully the pictures I uploaded make sense. Feel free to ask any questions.

Also, I printed one of these which is the display mount in the first picture: https://www.thingiverse.com/thing:3334386. Thanks Z122!

Thanks again Prusa team for making this open source and I hope I have credited this properly!

EDIT Sorry for the awful pictures. I'll get better ones eventually...