Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D TF2 Sentry Raspberry Pi 0 Case por vaettyr no Thingiverse

Descrição

This is a case for a Raspberry Pi Zero I designed based on the Level 1 Sentry from Team Fortress 2. The original design files are in OnShape if you want to make your own version. In addition to these printed parts and a Raspberry Pi Zero, you'll also need:

10cm USB ribbon cable with right-angle header
10cm HDMI ribbon cable with right-angle header 1 2 3
Female to Female USB-A coupler
5mm LED and resisitor as appropriate
5 x M2 x 4mm screws
2 x M2 x 8mm screws
7 x M2 x 4mm threaded inserts
4 x M2 x 16mm screws
2 x M2 washers
4 x M2 nuts
2 x M3 x 6mm threaded inserts
2 x M3 x 16mm screws

Thingiverse

TF2 Sentry Raspberry Pi 0 Case

vaettyr

56

Curtidas

0

Downloads

70

Coleções

Licença Creative Commons - Attribution

Arquivos (19)

SentryPiCase_Arm.stl 4.3 MB

SentryPiCase_Nut_Small.stl 1.7 MB

SentryPiCase_HDMI_Catch.stl 57.5 KB

SentryPiCase_Column.stl 5.6 MB

SentryPiCase_Barrel_Upper.stl 343.8 KB

SentryPiCase_Faceplate.stl 482.9 KB

SentryPiCase_Leg_Left.stl 3.7 MB

SentryPiCase_Leg_Right.stl 3.7 MB

SentryPiCase_Nut_Large.stl 1.7 MB

SentryPiCase_Barrel_Lower.stl 350.4 KB

SentryPiCase_Strut_Lower.stl 4.2 MB

SentryPiCase_Body_Fore.stl 6.6 MB

SentryPiCase_Body_Aft.stl 6.2 MB

SentryPiCase_Foot_Rear.stl 5.5 MB

SentryPiCase_Foot_Fore.stl 2 MB

SentryPiCase_Strut_Upper_Left.stl 5.9 MB

SentryPiCase_Strut_Upper_Right.stl 5.8 MB

SentryPiCase_Brace.stl 4.3 MB

SentryPiCase_Lid.stl 420 KB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.