Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D Clock one por PrintPartShop no Thingiverse

Descrição

This a mechanical clock that I have designed and built using 3D printed parts Find more detailed instructions here: It has hours, minutes and seconds, a Graham, or dead beat escapement, it is powered by weights, it has ratchets on the pulley to facilitate rewinding. It will run for about 5 hours, there is a nut to fine tune the speed on the pendulum See it here: https://youtu.be/wh0CArhOsug https://youtu.be/KoyZZXEglnw Find instructions and list of hardware needed on the attached PDF in the Thing Files: Clock One build instructions.pdf

Thingiverse

Clock one

PrintPartShop

129

Curtidas

0

Downloads

201

Coleções

1

Impressões

Tags

clock graham escapement Pendulum clock

Licença Creative Commons - Attribution

Arquivos (37)

frontFrameEscape.stl 39.6 KB

PendulEnd.stl 42.5 KB

ratchetHolder.stl 90.5 KB

anchorDeadbeat.stl 111.8 KB

hourHand.stl 37.4 KB

gear8.stl 154.1 KB

backFrame.stl 80.5 KB

nutM8.stl 188.4 KB

backFrameEscape.stl 76.6 KB

escapeWheel.stl 145.6 KB

Face.stl 250.5 KB

adjustNut.stl 494.2 KB

secondHand.stl 40.1 KB

stopRing.stl 42.1 KB

gear64_8.stl 467.7 KB

pendulLever.stl 49.1 KB

gear32.stl 341.4 KB

secondFace.stl 76.3 KB

minuteHand.stl 22.3 KB

plugSmall3-4.stl 124.1 KB

gear10.stl 151.4 KB

plugBig.stl 190.4 KB

pulleyHalf.stl 246.2 KB

frontFrame.stl 203.4 KB

gear30.stl 329.5 KB

end.stl 516.8 KB

washerP.stl 32.1 KB

gear60_8.stl 399.3 KB

pendulumHalves.stl 906.5 KB

screwPendul.stl 4.4 MB

adjustNut.stl 494.2 KB

pulleyRatchet.stl 335.1 KB

ratchet.stl 47.8 KB

screwPendul.stl 4.4 MB

spacer68.stl 28.4 KB

aBackFrameNoBushing.stl 347.3 KB

aFrontFrameNoBushing.stl 322.4 KB

Ver no Thingiverse