This remix was necessary for two reasons. The original power outlet hole for the Google Home Mini Mount by Yelt had did not fit the Nest Mini that I received. Also, if oriented in an upright position, it tended to lean to the left or right if knocked a bit.

I used one of the cable clips to plug up the hole below the speaker ring to make the hole ever-so-slightly less noticeable.

Great design otherwise!

UPDATED 3/6/2020

Added 'Thinner' version. The backing plate on the outlet was a bit too thick. Wife complained it would fall out so I made it thinner at about .75mm. Stays in the wall better. Would suggest printing that one.