This is a stand for housing a Tripler FeatherWing. The PCB is secured with M2.5 nylon hardware. Useful for propping up and displaying Adafruit Feather boards. Tripler FeatherWing features three breakouts for each pin on a Feather, as well as a bunch of plain grid proto holes.

Assembly Tutorial: https://learn.adafruit.com/circuitpython-oled-watch/clock-stand

Tripler FeatherWing https://www.adafruit.com/product/3417

Doubler FeatherWing https://www.adafruit.com/product/2890

Feather M4 Express https://www.adafruit.com/product/3857

RTC FeatherWing https://www.adafruit.com/products/3028

OLED FeatherWing https://www.adafruit.com/products/2900

Use the following hardware to secure the Tripler FeatherWing PCB to the stand.

4x M2.5 x 6mm male-to-female standoffs 4x M2.5 hex nuts 4x M2.5 machine screws You can optionally use tall/shorter standoffs. The black nylon standoff kit includes quite a few different sizes to choose from.