General Information

This clip provides better strength in the middle of Minkix "Bag Clip with Screw Cap". I had the problem where thicker packaging would push the legs of the clips apart, so I quickly designed this in Fusion360 which solved it.

Further Details

The clip has some pretty tight tolerances, so make sure your printer is calibrated well! These are needed to provide adequate clamping power. Otherwise, you can still scale it up by 1 or 2%, depending on your printer. The clip includes edges that are rounded out to better fit bulged out first layers. Feel free to edit the part to your needs with the provided .step file.

Printing

Make sure you have good bed adhesion for the small bits of the clip. It is best printed in PETG as PLA has the tendency to snap apart.