I needed a test, to see if my inner holes and measurements were right

All holes are in millimeter

all time approximations were made in Cura with the profile of a cr-10s pro, 0.2 layer height and 50 mm/s

Precision test.stl = biggest one 40-60 grams, 200x120 mm, 6 hours to print, i advise to print this one first and keep it to use as a cheat-sheet

Precision Test Fast Print.stl = smaller one, 10-20 grams, 200x100 mm, 2 hours to print, no text

precision Test no base.stl = no base, 4 grams, all loose profiles, 25 min to print

precision Test no base with ruler.stl = no base, 4 grams, all lose profiles, plus one 200x120 ruler. 28 min to print

all others are loose profiles, if you want to print just one.

edit: i made a small mistake on text and walls, it was supposed to be 1mm walls with 2mm extra on each profile, but i added 4 mm walls to most of it, already fixed text on Precision test V2.stl

edit2: if anyone wants original project with just 1mm wall just ask that i will include on here.

edit3: also all names on loose profiles are wrong, 15/17 will be 15/19 and 5/7 will be 5/9 i will try to fix this later