Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Simple but solid stand for rc models.
Print settings:
All parts except belka.stl: layer height: 0.2 mm top/bottom layers: 3 outline/perimeter shells: 3 infill: 20%
belka.stl layer height: 0.2 mm top/bottom layers: 4 outline/perimeter shells: 4 infill: 50%
Supports are needed for parts: pokretlom.stl and pokretlod.stl
In addition to the printed parts you will also need: 6x M6 carriage bolt 30mm long 4x M6 carriage bolt 20mm long 10x M6 nut 2x 32mm (1 1/4 inch) outer diameter PVC tube 50cm long thin sheet of foam rubber (from old mouse pad)
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta