*Updated 1/6/13

Printable Enclosure Frame for UP! Plus+ *Front is hinged to swing away for acess to the build platform. *Does not cover electronics

All the individual STL Files can be found in the .zip file. *Please note, the enclosure requires (2x) Part #4. Print 2 of these. *All parts have their number stamped into the inside corner/face so you don't loose track of what's what. *Use your favorite Filament Spool Holder and Filament Clip, But note that the OEM one will not work. *Be cautious during prints. The sharp edges have a tendency to lift/warp out of their support material until 4 or 5 layers are printed on top of them. Orient them to print best on your setup.

Parts Needed: *You will need 10 M3x10mm Screws. (possibly a few longer ones as well, depending on your filament and spool holders) *.093" Acrylic or Polycarbonate Sheet, commonly available at Home Depot.

Assembly: *Print All Parts *Cut out the windows to the correct size shown in the pictures. The measurements are exact size, I reccomend you minus ~1 or 2 mm to give yourself some clearance. *Screw 1, 1B, 2B, 6, and 6B onto printer. *Dry fit all other pieces together on the printer with the windows in place before gluing anything together. *Glue! *Take Pictures and Post!

Thanks to gillespinault for creating the laser cut window files.