I made this LCD controller case to reuse the old android tablet PC display with the Chromecast-like device. Although there is USB-compatible touch panel controller SSD2533, I decided not to connect it to anything (too awkward to solder tiny wires to the controller itself).

What's inside the case:

• MT561-B Universal LCD Controller
• LED Backlight Driver Board
• XL4015 DC-DC Step Down Module
• USB Socket (to power up Anycast device)
• 5.5 mm Power Socket

The buttons 'pin5pcs' are supposed to be into the 'display-case-p3', then goes the keyboard, then it's clamped with 'pin2pcs'.

The 'display-stand' part is supposed to fit into Thomson compact TV table plate. I printed two mirrored parts and put the M6 nut inside so I could use M6 pin to level the stand while it was glued to the case.

The case was printed with PLA, the parts were glued with instant adhesive, then the case was glued to the case with epoxy.