Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Flat box for Geocaching por LLSmurf no Thingiverse

Descrição

These are 2 little, flat boxes for hiding geocaches. The bigger box is 85 x 85 x 8.2 mm (plus hook). The drawer is held in the box by 2 neodym magnets 5x5x3mm and 2 wood screws 2x12mm (Spax). A fitting logbook can be downloaded here.

The smaller box is 63 x 65 x 6 mm (plus hook). The drawer also uses 2 neodym magnets 5x5x3mm and 2 nails 1,4x25mm to stay in place. A fitting logbook can be downloaded here.

In addition you will have to glue the top to the case. I normally use UHU Allplast or UHU plast special for this purpose. Please beware those boxes are not waterproof of course.

Update: As I had issues keeping the log book dry in the other boxes - my cache is exposed to full wheather, I design and uploaded a flat, round box, that so far proofed to be almost rain proof.

Thingiverse

Flat box for Geocaching

35
Curtidas
0
Downloads
72
Coleções
Tags
geocache geocaching geocaching box
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (7)
FlacheBox_case.stl 491.3 KB
FlacheBox_top.stl 33.7 KB
FlacheBox_drawer.stl 118 KB
FlBox_kl_case.stl 497.2 KB
FlBox_kl_top.stl 39.7 KB
FlBox_kl_drawer.stl 67.7 KB
Runde_Flache_Dose.stl 2.5 MB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta