Atari 400/800-, XE- and XL-themed enclosures for the eclaire mini Atari-8-bit-compatible computer. Remixed to fit the second run of circuit boards (July 2019, purple PCBs).

If you own a blue circuit board from the first run, use the original v1.12 models instead: https://www.thingiverse.com/thing:3562690

eclaireXL thread on AtariAge: http://atariage.com/forums/topic/281810-atari-compatible-hardware-eclairexl-in-mini-form/page-1

A huge thanks to toddtmw on AtariAge for printing, testing, and posting photos to help me finish these models.

The unified models are included so that you can visualize the assembled shells from different angles. Do not attempt to print them.

A blank top cover is supplied, and the other has an indentation for affixing a logo plate (requires supports when printing).

You might need to trim the outer mounting tab of the SIO port to fit the board in the case. Some shortening and trimming of the standoffs and supports might be required. Ideally, file or carefully grind them down until case fits and the ends still contact the board.

Requires 4x M3 machine screws. Screws are optional for the center standoffs. You may need to trim or remove some of the center standoffs to install expansion boards.

No cartridge guide is included. You can use foft's cartridge guide which is available in post #114 and here: http://www.64kib.com/atarixlfpga_svn/trunk/atari_800xl/eclaireXL_ITX/hardware/case/mini/stl/Cartridge%20v8%20top_up.stl You will need two screws to affix the guide to the standoffs beneath the circuit board.

Changes in this v1.2 remix: The two standoffs under the cartridge slot were moved 1mm inboard and inline with the cartridge slot. A cutout was added to the standoff adjacent to the SD slot for added clearance.