Description

This is a modular, snap fit riser for representing verticality on your 1 inch (25mm) hex grid RPG play surface.

• Riser - Sections snap together infinitely and are 1 inch high each.
• Platform - Snaps onto the top and can support up to 33mm miniature bases.
• Foot - (optional) Snaps onto the bottom and will provide a bit more stability when you go more than a few risers high without blocking any adjacent hexes.

If you make some of these, please post a make with your favorite miniatures! Also feedback is welcome and appreciated!

Printing Notes

• Riser
  • These are accidentally a pretty good stringing test, so if you're not well calibrated or your filament is prone to stringing, these may require a bit of light filing and/or heat gunning to clean up in post. Nbd.
  • The final bridge at the top of the riser can be prone to just enough of a collision with the nozzle to knock your print loose in some cases when the part warps slightly due to cooling while printing. A brim can help with this if you can't adjust your part cooling to reduce any warping.

Future plans

• 2 inch platform
• bigger foot (if needed for 2 inch platform stability at greater heights)

If any of these future things are desperately needed by anyone, let me know. My group just hasn't had a need yet, so I've deferred making them, but they will take very little time to make and upload if there is a public outcry for them.