I purchased this paddle switch, Amazon recommended junction box, and cord for my 1950's Craftsman table saw restoration project.

https://www.amazon.com/gp/product/B005W17FRS/ref=as_li_tl?ie=UTF8&tag=madau3d-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B005W17FRS&linkId=89e43343ed62351779e4517a963be0af https://www.amazon.com/gp/product/B005W17FRS/ref=as_li_tl?ie=UTF8&tag=madau3d-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B005W17FRS&linkId=89e43343ed62351779e4517a963be0af https://www.amazon.com/gp/product/B005W17FRS/ref=as_li_tl?ie=UTF8&tag=madau3d-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B005W17FRS&linkId=89e43343ed62351779e4517a963be0af

The paddle switch and power cord are fantastic, but the box was crap. The switch didn't even fit, and there isn't any real good way to attach it to the table saw, so I thought I'd just model one up and print it myself.

I'm including two versions of the box, one with mounting flanges and one without, so you can remix it with whatever mounting flange your project requires.

I used these 1/2" strain reliefs https://www.amazon.com/gp/product/B005W17FRS/ref=as_li_tl?ie=UTF8&tag=madau3d-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B005W17FRS&linkId=89e43343ed62351779e4517a963be0af

There are two little slots where you insert the little hex nuts that come withe the paddle switch. Also, there is some sacrificial bridging under the screw holes that you need to clear out with a small drill bit.

(P.S. Please excuse my messy garage)