Here you can find the 3 models of the cases for the MSX FLEX project, that was developed by RBSC. The models include the upper and the lower parts of 3 different cases - the cartridge case, the 50-pin extender case and the 60-pin extender case. The model of the pin for the 50-pin extender is also included.

The top covers of all 3 cases have the "MSX FLEX" text visible when printed with light colored plastic. The letters are hollow and they are covered by the 0.2mm polygon from either side. Please be careful not to damage the top layer above the letters.

Also included are the models with their top layers covered by the 0.2mm polygon. Such models have "noholes" string in their names. This method ensures the high quality of the top and the bottom surfaces of the printed models as the printing head is not moving around when printing the first layer. The necessary holes can be cut later with a sharp knife. The screw holes can be opened by gently inserting a Philips screwdriver into them.

The project files are available in RBSC's Github repository:

https://github.com/RBSC/FLEX

For engraving I am using the KKmoon 3000 mW laser engraver:

https://www.amazon.de/KKmoon-Lasergravur-Werkzeuge-Automatische-Gravurfl%C3%A4che-Rot/dp/B07H3PWLNG/

If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page:

https://www.thingiverse.com/Wierzbowsky/designs