Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a small camera case for the ESP32 camera board. It has tight fit pin slots and room for a cooling block.
I recommend using M3 inserts like shown on the photos (print "Voorkant_insert.stl" instead of "Voorkant.stl"). Try setting the soldering iron to a temperature that matches the material melting point. Too hot and the material will warp.
If you print with 0.2mm layer height, use the achterkant_large_holes.stl file. This file has pinholes that are 0.5mm larger, so that the holes won't be too small/closed.
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta