XT60 Splitter Box.

Assemble using:

Various M3 Screws M3 Washers M3 Nylon Locknuts 1x Male XT60 (Mates to Battery) 4x Female XT60 (Same Connector as Battery) 2x Un-insulated Solid Core Copper Rod

-Glue XT60s to case. -Adjust/Spin the XT60 contacts as needed to line up all the flat sides of the rear side of XT60s. -Solder the solid copper rod lengthwise across all XT60s. -Attach cover with hardware as required.