Autodesk Fusion 360 Challenge #WearableFusion

This is my project for the Autodesk fusion project. It’s about creating a jean button that includes a piezoelectric sensor. If the user be in an emergency situation, he will press the jean button to call and emergency signals will be send. He can adjust the settings about the needed force for button activation, the pattern or who will alert. Specifically the button will connect with a microcontroller (like an arduino nano) and a gps tracker which will give the exact information about user's location. The system will include a small battery (maybe about 1000mah). For the system charging, will be a wireless charging kit inside the jean pocket where the user will be able to charge it either with a cellphone which supports that technology or with a similar technology power bank. All components will sew inside the Jean’s fabrics. The button consists of three parts. The first two parts integrate the sensor. These pieces will glue only with the sensor to provide freely movement between them. The button parts designed to attach them together with extraulite use of glue.

Project powered by Autodesk Fusion 360. The model was designed on a scale of 1/10.

https://a360.co/2Kf8guN