Ball & Socket Camera Mount, 100% Lock Up with a simple design.

Try this one before the others. It's a solid build with no breakage. Will hold the heaviest equipment.

printed @

0.1mm ht for ball @ 50% speed 0.2mm ht for male & female @50% speed 0.2mm ht for nut knob @ 50% speed 0.3mm ht for rings @ 100% speed 0.3mm ht for base @ 100% speed, 50% last 2 min

Smoothed ball & ball seat. Glue where necessary.

1/4" x 20 bolts & nuts used. Need 25-30 mm bolt threads for full 90 degree tilt.