This is a micro fully 3D printed tank that has a first person view (fpv) camera on the front. Controlled by a remote control transmitter and a small brushed ESC. The tank is very quick and maneuverable and a blast to drive around the backyard. The 3D printed flexible TPU treads allow it to scale a variety of terrains and obstacles. Its small size allows for any space to become a new adventure!

The parts listed below can be printed and assembled according to the photos above. If you have any questions please leave a comment! Happy tanking!

Design Notes: Due to the heavy motors used in the design I recommend using some counterweight in the rear of the craft to help stop flipping. I used some nails to accomplish this but any small metal object will work. In future versions this will be solved so stay tuned for updates!

Printing Notes: I printed the body and wheels in PLA using standard PLA settings. For the TPU treads, I used a flexible profile and printed very slowly with support on. I have also included a part called tread TEST PRINT where you can test your TPU settings without having to print an entire tread.

Parts Required:

(Printed) 1x Micro Tank Chassis 1x Micro Tank Top Plate 4x Micro Tank Bearing Roller 2x Micro Tank Motor Gear 2x Micro Tank Tread

(Purchased and Required) 2x Micro KitBots motor https://www.kitbots.com/product.sc;jsessionid=08BEFA9B160014A2DC12C0D611E1E485.p3plqscsfapp006?productId=30&categoryId=1 1x Camera (I used a common and cheap camera size but comment down below if you would like a top plate custom designed for a new camera!) https://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html?rmmds=search&ID=44070&cur_warehouse=CN 4x Bearing https://www.amazon.com/gp/product/B07FF51L9Q/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1 4x M2x8mm screw with washers https://www.amazon.com/Hilitchi-600-Piece-Phillips-Assortment-stainless/dp/B01N2XYON0/ref=sr_1_14?keywords=m2+screw&qid=1558837843&s=industrial&sr=1-14 2x M2x5mm Countersunk screws to hold on the top plate (These aren't necessary but nice to have. A piece of tape will work just as well) https://www.amazon.com/gp/product/B01MZ60SJJ/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1

(Purchased but Other Options Work) 1x Dual Brushed ESC (I used the following B version ESC but other brushed ESCs will work as well) https://www.banggood.com/2S6A-Micro-Dual-Bi-Directional-Speed-Controller-for-Tank-Crawler-and-Boat-without-Brake-p-1032413.html?rmmds=search&ID=520188&cur_warehouse=CN 1x Receiver (Again, many options for this component but I use a D4Rii. I have posted a link to a very small Frsky receiver that's more ideal for the size) https://www.banggood.com/2_4G-8CH-D8-Mini-FrSky-Compatibel-Receiver-With-PWM-PPM-SBUS-Output-p-1140478.html?rmmds=search&cur_warehouse=CN 1x 2s LiPo Battery (I use a 300Mah battery but the size can vary slightly. A 2s 500Mah battery is slightly too big for my tank but if it fits it'll work!) https://www.banggood.com/Giant-Power-7_4V-300mAh-35C-Battery-For-HCP100s-T-REX-150-F3P-p-987487.html?rmmds=search&cur_warehouse=CN 1x VTX (I use this small video transmitter but other very small VTXs work as well!) https://www.banggood.com/Eachine-VTX03-Super-Mini-5_8G-72CH-025mW50mw200mW-Switchable-FPV-Transmitter-p-1114206.html?rmmds=search

Video:https://youtu.be/jxZkj3Deqsw