Hypercube PROTOCREATION

You like it click on the heart :-). You build it add a make :-). You remix it add a remix THANKS ;-)

15/07/2019: add better fanduct

25/05/2019: add BLtouch mount

20/05/2019: add pulley spacers, between pulleys you 'll need very small m3 washer, me I used M2 washer drilled to M3 to have small outer diameter.

14/05/2019: add hinge for 4mm thick front door.

A big modification of the goooood Hypercube AVZ thanks to the original designer.

WORK IN PROGRESS:

My PRO facebook: https://www.facebook.com/ProtoCreation

1 ask before order parts ;-) I have the links :-) BOM ongoing.

2 It a bit messy I'll explain how to assemble everything ASAP

Aluminium extrusion profiles 2040 motedis "B type 6mm". Go for 4040 instead for more rigidity and the price could be very close with "systeal 4040 6mm"

More extrusion are needed than the BOM indicate for cantilever Z design. update soon.

I used inner corner brackets. Go for bigger and outer corner bracket for more rigidity.

MGN12H rails for X and Y MGW15H for the Z (need to modify the mount to add rigidity: the extrusion twist without reinforcement and maybe go for 2 X MGN15H instead of 1 MGW15H)

SFU1204 8mm endmill

0.9° motors for X and Y 1.8° for extruder and Z

duet WIFI

BMG extruder

24V power supply 600W (or more for bigger heatbed)

330 X 330 mm 24V bed (need to go for an bigger and flatter aluminium plate and silicon heater + glass)

A specific shielded wire for panel due to avoid COM errors: https://fr.aliexpress.com/item/32816937320.html?spm=a2g0s.9042311.0.0.27426c37CvFz7u

10mm thick aluminium plate to hold the bed, I'll make a dxf or scematic.

Descrição