The VENOM V2 is a 2020 extrusion based 3d printer. Designed to be highly customizable this printer has a light weight but sturdy frame. Made from 4 500mm and 3 250mm 2020 extrusions. It was designed in autodesk fusion 360. marlin config and config adv files are included

The parts list is a work in progress. Feel free to make suggestions.

4: 500mm t-slot aluminum extrusions 3: 250mm t-slot aluminum extrusions 10: 90 degree 2020 brackets 1: 220 x 220 heated bed (and whatever bed assembly you want i used one from an anet a8) 1: hotend (I used an e3d v6 clone but you can use any. If you change the carriage.) 1: carriage assembly of choice (The z rods and screws are compatible with anet X axis assembly such as this https://www.thingiverse.com/thing:2328353) (My setup is here https://www.thingiverse.com/thing:3622206) 5: nema 17 motors ( Wiring for them) 1: 2 meters of g2 belt 2: pulley and gear set (I used a 16 tooth gear.) 2: 350mm m8 threaded rods 2: m8 brass nuts 2: 2 linear bearings 4: 380mm m8 rods 2: 450mm m8 rods 2: m5 to m8 lead-screw couplers 3: end-stops with wiring 1: mainboard(I used a ramps 1.4 and put it in this https://www.thingiverse.com/thing:1640870) 1: lcd/SD reader of choice ( I used a full graphic lcd and put it in this https://www.thingiverse.com/thing:3383951) 34: m2 t-slot bolts 42: m2 10mm bolts 1: 12v dc power supply