Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Mars base por Munchie12 no Thingiverse

Descrição

This base has 1247 sq ft if living space divided between 6 pods and 5 hallways. the structure will be flow to mars in a costume launch vehicle bases on the delta II this is transportation mode (step 1). the base is built out of carbon fiber and aluminum 6061 it is broken down into 8 different types of panels; 6 center floor panels, 6 center roof panels, 6 hall floors, 18 hall walls, 10 door walls, 37 walls, 48 floor sections, and 48 roof panels (total of 179 panels.) The roof and walls panels are covered in a solar array of 8x8 in solar cells the hole array can generator up to 25752960 watts per 24 day. The pods will be constructed on mars by connecting the panels. with steel pins and sealed with epoxy. base construction will starting with the floor of hall1 this will be the air lock during construction, fallowed by the center pod than all the halls than the pods this will be built. After the base is completed it will be inhabited with pod1 serving as the hygiene pod, pod2 a sleeping pod, pod3 a food storage and kitchen, and pod4 as a lab. the mars base will be biult by a crew of 5 per rocket.

Instruções

The three main mods can by made by printing the following parts
the transportation mood
1 Rocket, 1 Rocket engine, 1 crew cabin. 1 wall pack, 1 roof pack 1 center floor pack, 1 center roof pack, 1 hall pack.
one unassembled pod with hall (panels)
8 base parts, 8 roof parts, 7 pod wall, 3 hall walls, 2 doors, 2 door walls, 1 hall floor, 1 roof center, 1 floor center. ,
the full base
9 doors, 6 base plates, 6 full roofs, 6 halls, 4 pod1 walls, 1 air lock walls, 1 central pod walls.

Thingiverse

Mars base

11
Curtidas
0
Downloads
10
Coleções
Tags
MakerBotMars Mars mars base space
Licença Creative Commons - Attribution - Share Alike
Arquivos (25)
base_plate.stl 1.4 KB
floor_center.stl 1.4 KB
hall_floor.stl 684 B
door.stl 684 B
center_pod_walls.stl 125.3 KB
air_lock_walls.stl 241.1 KB
base_part.stl 684 B
hall_wall.stl 39.7 KB
crew_cabian.stl 91.5 KB
full_roof.stl 171.8 KB
roof_center.stl 1.4 KB
halls.stl 118.8 KB
pod_wall.stl 39.7 KB
roof_part.stl 21.8 KB
rocket.stl 187.7 KB
side_all_conected.stl 277.6 KB
rocket_engein.stl 484.8 KB
full_systum.stl 3.2 MB
transpotashion_full.stl 4.1 MB
center_roof_pack.stl 8.3 KB
center_of_floor_pack.stl 8.3 KB
pod1_walls.stl 277.6 KB
base_part.stl 684 B
roof_pack.stl 8.3 KB
full_pod2.stl 571.6 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta