Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Universal Bed camera mount - fully printed por C47_3D no Thingiverse

Descrição

Camera mount for printer bed Fully printed

1/4" screw on ball (screw was resized a little after print, its was not tested again but should fit).

6 clip models Original (should be stronger but will not fit well in some cases) and rounded simplified. Small should fit the bed 0.8mm (+/- 0,2), normal ~1,4mm (+/- 0,2), very small ~0.4mm

edit 2020.II.18 Added 2 smaller gap clip models.

edit 2020.II.20 Added Clamp with screw, as more universal holder, and a base model without ball if you want to record from lower height (but without being able to change the angle) and to use less filament to. Both clamp screw and base screw should be printed with 100% infill for more strenght

Thingiverse

Universal Bed camera mount - fully printed

C47_3D C47_3D (abre em nova aba)
19
Curtidas
0
Downloads
32
Coleções
1
Impressões
Tags
bed c47 camera camera mount holder mount
Licença Creative Commons - Attribution
Arquivos (14)
JG_bed_camera_holder2_base.stl 224.3 KB
JG_bed_camera_holder2_ball.stl 363.9 KB
JG_bed_camera_holder2_base_nut.stl 140.1 KB
JG_bed_camera_holder2_rod_nut.stl 138.9 KB
JG_bed_camera_holder2_clip.stl 343.8 KB
JG_bed_camera_holder2_clip-small.stl 343.8 KB
JG_bed_camera_holder2_clip-round.stl 339.1 KB
JG_bed_camera_holder2_clip-round-small.stl 339.1 KB
JG_bed_camera_holder2_clip-very-small.stl 343.8 KB
JG_bed_camera_holder2_clip-round-very-small.stl 339.1 KB
JG_bed_camera_holder2_clamp-screw-blocker.stl 13.1 KB
JG_bed_camera_holder2_base-without-ball.stl 181.2 KB
JG_bed_camera_holder2_clamp.stl 67 KB
JG_bed_camera_holder2_clamp-screw.stl 189.8 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora