Yet Another Grass Applicator!

Loosely based on Luke Towan's videos: https://www.youtube.com/watch?v=8gYmeRaaaL8&t=24s https://www.youtube.com/watch?v=v5o2l5EaeNE

Tools required Soldering iron, Glue gun, Drill/Dremel (optional)

Electrical components:

• 1 Negative Ion Generator. The one in the video above had only 3 leads (the negative/black wire was common). The model I found had 4 wires, so no need to split that black connection in 2.
• 1 Wire mesh. I used one with 1mm gap, you need a circle of about 12cm in diameter.
• 1 Switch. I used an SPST like this
• 1 DC Jack Socket like this
• 1 Crocodile clip
• 1 12V DC supply. (500mA rating or more should be plenty)
• Some cable, ideally stranded.
• Shrinking electrical tube/tape.
• optional: Connectors (I used these), but you don't really need them.