Raspberry Pi Server mount on 19" Tray

You can put 2 Raspberrys with OLED Stats Display, SSD and a Power Supply Unit in a 19" 1U 150mm Server Tray, or just 3 Raspberrys.

Instructions

Part 1 and 2 will be glued together. Screw the Raspberry Pi in part 1.
Part 1 and 2 will be screwed to the tray.
If you want to install a SSD you need part 7, aswell as part 8 for the USB to SATA adapter.
Glue part 3 and 5 to part 4. Mount the LEDs to part 6 and screw it in to part 3 and 5.
The OLED is connected via i2c to the GPIO of the Raspberry Pi.
There are 2 leds for ACT and PWR and a button to shut down the Pi.

Links

19" tray: [https://www.amazon.de/Intellinet-Fachboden-Frontmontage-Profilschienen-712491/dp/B00NW49LE2](https://www.amazon.de/Intellinet-Fachboden-Frontmontage-Profilschienen-712491/dp/B00NW49LE2) Power Supply: [https://www.amazon.de/Mean-LRS-50-5-Netzteil-Ultraflach-Einbau-Metallgeh%C3%A4use/dp/B07G2FD4K2/](https://www.amazon.de/Mean-LRS-50-5-Netzteil-Ultraflach-Einbau-Metallgeh%C3%A4use/dp/B07G2FD4K2/) USB SATA Adapter: [https://www.amazon.de/Renkforce-Raspberry-USB-SATA-KONVERTER/dp/B0107X4U0A/](https://www.amazon.de/Renkforce-Raspberry-USB-SATA-KONVERTER/dp/B0107X4U0A/) OLED Display: [https://www.amazon.de/AZDelivery-Display-Arduino-Raspberry-gratis/dp/B074N9VLZX/](https://www.amazon.de/AZDelivery-Display-Arduino-Raspberry-gratis/dp/B074N9VLZX/) Software for the OLED: [https://github.com/David-Ka/Pi_stats_OLED](https://github.com/David-Ka/Pi_stats_OLED)