Often there is a requirement for the use of tools and bits which do not form part of standard tool sets; a good example of this is a 32mm socket to be used with a 1/2" socket driver (Ratchet Wrench).

Tools can easily be bought at a hardware store; however I wanted to challenge myself to design a tool bit which could interface with the existing tools I have, as well as test the limits of 3D printing designs in a working environment.

I hope this inspires everyone to play around with 3D design, breaking the boundaries of the norm of materials used to create products and parts; and to continuously test the limits of what is possible, learning through failures and rejoicing in successes.