Be come the Jedi you were destined to be! Manufacture your lightsaber and take your place in the battle between the Jedi and Sith! This is a complete user assembled model of one of the greatest allies a Jedi has! "Your lightsaber is your life"

Use the ZIP file for all at once download. I changed some files for greater tolerances for all interconnected parts. Pleas let me know if there is a problem. I will change the files if I find any here. Print, paint and assemble all components. Zip file has all components or download individual parts. The Chrystal goes in the chamber and then capped. Glue the two lower body sections together (body one and three,) ribs on body one and cap and buttons on top section (body2). insert bottom, battery, assembled chrystal chamber, amp chamber and beam chamber in lower body sections. Gently wiggle the body top on. You may have to sand down the tabs a little to encourage them to go over the rib without cracking. Body three and two should snap on and hold it all together so you can open it later to service it or put it on display. Order of components assembly to come in the form of video soon along with pictures. The parts only go together one way and isn't too hard to figure out. Be warned the crystal may need to print with support. I had trouble rendering a good looking crystal. I may make my own by hand or harvest one! Print some components in different colours for variations. I can't wait to see other copies! I am releasing a kit of parts next that you can mix and match for more variations so stay tuned!