Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D 3d Printer Plexi Enclosure por the_lou_kou no Thingiverse

Descrição

I decided to design my own enclosure. The goal was to make it as little visible as possible. So, plexiglass and prints! Originaly designed around the Prusa i3 MK3, but this ended up being customizable in terms of size, as you can make the plexi parts as big or as small as you wish, to suit your personal needs.

PS: Included .zip file is organized in folders, much easier to organize your prints. Standalone STLs included mainly for viewing on your browser.

PS: Please contact me for suggestions or just if you need help in building this! Better do this through my Instagram or Twitter :) While you are at it, give me a follow if you like to see what 3d printing or designing adventures i might end up in. :D

Update 25/04/2019: Removed old single-part Einsy stand with new two-part. I kept breaking the single piece while installing the Einsy and cables. New design makes the whole proccess much easier.

Thingiverse

3d Printer Plexi Enclosure

the_lou_kou the_lou_kou (abre em nova aba)
155
Curtidas
0
Downloads
208
Coleções
Tags
3d printer 3d printer enclosure enclosure plexiglass prusa i3 prusa i3 mk3
Licença Creative Commons - Attribution - Share Alike
Arquivos (31)
BackLower_R_base.stl 2.6 KB
BackLower_L_base.stl 2.6 KB
BackLower_R_corner.stl 74 KB
BackLower_L_corner.stl 74 KB
FrontLower_R_door_inner.stl 45 KB
FrontLower_L_base.stl 14.9 KB
FrontLower_R_base.stl 14.9 KB
FrontLower_L_corner.stl 119.1 KB
FrontLower_L_door_inner.stl 45 KB
FrontLower_R_door_outer.stl 99.6 KB
FrontLower_R_corner.stl 119.1 KB
BackUpper_R_inner.stl 40.2 KB
BackUpper_L_inner.stl 49.2 KB
BackUpper_L_outer.stl 134.7 KB
BackUpper_R_outer.stl 72.7 KB
FrontLower_L_door_outer.stl 99.6 KB
FrontUpper_L_corner_inner.stl 27.2 KB
FrontUpper_R_door_inner.stl 32.7 KB
FrontUpper_R_corner_inner.stl 27.2 KB
FrontUpper_L_door_outer.stl 104.6 KB
FrontUpper_R_corner_outer.stl 84.9 KB
FrontUpper_R_door_outer.stl 104.6 KB
FrontUpper_L_door_inner.stl 32.7 KB
FrontUpper_L_corner_outer.stl 84.9 KB
DoorLatch_Magnet_case.stl 30.4 KB
DoorLatch_Top_piece.stl 82.7 KB
DoorLatch_Handle.stl 63.6 KB
Einsy_Case_Stand.stl 36.2 KB
Filament_Guide.stl 151.1 KB
einsy_standBase.stl 3.6 KB
einsy_standTop.stl 36.6 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora