Parametric Spinning Top

Try out big and small tops with thick or thin rings to find out which one spins best!

Assembly:

• Print both halves ... tip: print sequentially to avoid stringing
• Glue together

As a centering help, you can use a short piece of 1.75 mm filament in the centering holes in the "bottom" faces (as on the printbed).

If you're looking for a good top that can be assembled without glueing, check out this design by schutzi99:

https://www.thingiverse.com/thing:3490151

I found it spins quite well, but I thought larger or heavier tops might spin even better ... :-)