The DarkMoth is a revision of my mini delta wing (400mm wingspan), designed for stable flight without a flight controller, and to be extremely portable for flying anywhere. All electronics are housed in a 3D printed center pod, and the wing consists of three stacked layers of foam board for a KF style aerofoil. I designed it so rebuilds would be quick and simple after a crash, though it's proven very durable so far. Mine uses two 9G servos, 2S 450mah lipo, and 4500KV 1106 motor.

The camera housing is designed to fit a RunCam Micro Eagle or RunCam Micro Swift. I highly recommend printing the motor mount in ABS or other high-temp plastics, as those little 1106 motors can get quite hot. Also, updated camera adapter to hold a tinywhoop style AIO camera.

UPDATE - Revised motor mount for far better cooling and better line of thrust for more lift. This moves the motor into a dropped position behind the frame. Also added control horns, which I previously forgot to upload.

Additionally, create two additional fins to mount to the underside of the wing for slightly improved stability and prop protection. The same fin copy can be used while cutting off the "step".