This is a wall mount swivel/turning bracket for 4 panels of WenTai smd boxes .

If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please consider using this link :

I had to get more space on my wall ,and originally i had designed a pivot bracket for 2 pcs of (18x4) full panels
but needed more space . This new bracket design holds 4 panels (one panel is 9x4 boxes in my case ) and all panels can swivel so it is easy to get to the components. Be aware of that you have to print 2 complete brackets BUT the top piece that holds it all in place is different depending on if the bracket is in the top or at the bottom . Everything was printed on the Creality Cr10s with no support . I printed this in 0.2 mm in maxpla ,(it's a tougher version than ordinary pla ) . Depending on how well your printer is dialed in you might need to slightly file the pivot holes in the brackets that screws on the WenTai boxes .

Im sorry for ,that suddenly i can not get Thingiverse to show the .stl files correctly placed on the print bed , as they are meant to be printed ,BUT you can see the pictures of the finished prints if you like to see how the parts need to be on the print bed.

To make 2 complete brackets you need the following components :

m3 x 10mm - 16pcs m3 nuts - 16pcs woodscrew - 12pcs

Take care when you assemble these brackets ,it is very important that they are assembled excatly as shown in the picture above otherwise they will not work .

Nb! I have dsigned a WenTai box divider ,so you can have 3 small storage rooms in one box .You can get it here : https://www.thingiverse.com/thing:2944366