This is a remix from Ingenioso3d.

Its better than his version because of the Preheat at the startup. The temperature is beeing saved after the leveling so you can print with the saved heat. There are two language files, english and german.

While you wait for temperature you can clean the nozzle.

If you want to edit the temperature, do so by opening the gcode with the windows editor and change the values.

NOTE:

Once the file of the leveling procedure is executed, the head moves through 9 positions on the bed following the path 1-2-3-4-5-2-3-5-1. Each time the head is stopped, the bed must be leveled using the screws on the base and the screen button must be pressed to continue the process.

+Test calibration cube 20x20x20 mm: https://www.thingiverse.com/thing:3162872 NOTA:

Una vez se ejecuta el archivo del procedimiento de nivelado, el cabezal se desplaza por 9 posiciones sobre la cama siguiendo la trayectoria 1-2-3-4-5-2-3-5-1. Cada vez que se para el cabezal, hay que nivelar la cama mediante los tornillos de la base y apretar el botón de la pantalla para que continue el proceso.

+Test cubo calibración 20x20x20 mm: https://www.thingiverse.com/thing:3162872