I was inspired by Devin Montes (@MakeAnything3D) to create a slingo of my own - an Easter Bunny.

It's my first attempt and I've included the Fusion 360 file. You'll notice that the head and body are in two separate parts. I did this mostly for my own convenience during the development process. I've included STLs for the head and body separately, and 1 big STL that includes them both. If you print them separately you can print the head at a low infill. The body should be 100%. If you print the single model, you can use your slicer to change the infill settings of the two areas if you'd like. I did this in Slic3r.

There are also STLs for the left and right eye and the nose. I printed these in a different color and they snap into place. You could use a dot of glue, but I didn't find it necessary - especially for the eyes.

Here are a couple of short videos showing the bunny: Cracking apart the layers The finished product

I've printed this design on a Prusa MK3 and an Ender 3. A friend printed it on a CR-10.