HT Traingle Bracket.

-Size: 30x30x30mm. -Walls: 4mm. -Holes: 5mm countersunk.

I made them en used them for the top half of my Ikea LACK printer enclosure. But they can be used for a lot of different things of course ;-)

printed in:

Layer Height: -0.2mm Infill Density: -50% Infill Pattern: -Cubic Subdivision

Print temp: -200 Build plate temp: -60

Print Speed: -60 mm/s

Supports: -no Overhang Angle: -..'

Build plate Adhesion: -Skirt

Printing time: -1x-00H 31min -4x-01H 44min

Fillament: -1x-1.50m /~ 4g -4x-5.96m /~ 18g