Modelo 3D BLV mgn Cube - 3d printer por BLV no Thingiverse

Descrição

Important notice: The Projects has moved to https://www.blvprojects.com Thank you :)

official site: https://www.blvprojects.com Facebook page: https://www.facebook.com/groups/BenLevi direct link to the project: https://www.blvprojects.com/blv-mgn-cube-3d-printer

Hi, my name is Ben Levi and This is: "BLV mgn Cube" open-source 3D printer project. building your own good and reliable 3D printer is the main purpose of this project. Basically, it's an open front structure CoreXY 3D printer, based on mgn linear rails for maximum accuracy, efficiency, and high print quality.

Notice: I promise to update this Project page on a weekly basis until it will be completed.

Fast, reliable, accurate The linear bearing and Delrin Wheel Gantry commonly used at most of the low-mid 3d printers as a cheaper solution for linear motion. well, ye.. it's cheaper but at the expense of accuracy and reliability. linear guided rails (mgn rails) are a way more rigid, extremely precise, and smoother then linear bearing or Delrin. shorting print time without compromising on print quality. There seems to be a good reason why they are mostly used with high-end 3D printers. So, i found cheap Chinese mgn rails at Aliexpress and thought to myself why not?
Rigid open structure I focused my efforts on designing an open front structure that will be rigid as a cubic structure but yet giving you easy access to your build plate and prints. the design includes a front belt tensioner to make it even more convenient. It came after spending tons of hours of software simulating and physical stress test.
Accessible All the parts are easy to find, print or make. You will not find in the BOM an expensive CNC special machined parts or parts that are hard to get. most of the parts are printed or you can buy them online / locally. Notice that you can use your own electronics - as long as you have the knowledge to make your FW suitable to the build.
Open Source You don't need to ask for the original CAD files since i already included it inside the project folder. I admire this community and believe that sharing is the main key in order to make this project even better. Feel free to download the CAD files (Step file) and modify, add, remix or improve it as you like. I would appreciate if you could please share it with this awesome community and mark the remixed parts as a "remixed" linked to this project page.
Build and print I spent many hours adjusting the Firmware for this 3D printer and fine-tuning the best slicing profile (Simplify3D) for it. After building this printer you will only need to upload the config files, load your slicing profile and you are good to go.
More modular The design is more flexible then you think. the printed parts and structure designed to be modular. Not only you can choose your Z height - But you can use a much bigger build plate. all you need to purchase a bigger aluminum profile and mgn rails. The provided CAD file will assist you in calculating the right measurements for your customized "BLV mgn Cube" 3D printer.
Easy to build? To be honest, the installation of the rail will take 70% of the build time. you will have to be accurate and spend a few hours aligning the rails, but boy.. the joy you will feel when it prints will worth every minute you spent installing them. To make it easy on you, I made a 3D animation videos as instructions, Information PDF, sketches, and measurements.
balanced budget The cost was important, therefore the BOM is balanced to give you the best money-value ratio, without compromising on quality. you will find The best 32bit board a 3D printer can have. Excellent stepper motors, sensors and so. you get to choose if you want to have a 5" panel due touch screen or save 80$ and use your smatphone/Tablet screen without losing features.

To your convenience, i added below an Online 3D viewer links. you will be able to explore the printer and the isolated frame:

Facebook group You are more than welcome to share your thoughts, build videos/photos and more at the BLV mgn Cube facebook group: www.facebook.com/groups/BenLevi

Latest updates:

03/02/19: added Jigs 06/02/19: Printing orientation description added + image 07/02/19: added Printer size calculator (Excel file) and info 09/02/19: now BOM calculator file supports Threaded rods length 09/02/19: added block shield for Bltouch, 8mm,and 12mm sensors. 09/02/19: front panel for smartphone.stl - fixed 15/02/19: electronics schematics updated (dual extruder + buttons) 16/02/19: added BMG direct drive extruder (3 STL files + instructions) 16/02/19: added Big Air Scrubber - HEPA+Carbon (working on instructions) 17/02/19: renamed back the 8mm/12mm mounts 17/02/19: added walls dimensions pdf 18/02/19: added Calibration Z height guide 25/02/19: added Zesty Nimble front plate and block shield 26/02/19: Belt system V2 updated - Please use only flanged 623zz ball bearing+flip belt. 28/02/19: fixed Z-height calibration guide 08/03/19: added spitfire fan cover 08/03/19: added Front plate for Chimera (not suitable for layer fan/sensor) 18/03/19: Wiring diagram fixed. 19/03/19: added Step file (CAD) for the DirectDrive setup. 20/03/19: added DWG for the (bottom, Rear, sides) Panels 25/03/19: small fix: Front Panel - Left plate for PanelDue 5 STL file 31/03/19: Fw updated - added M80 PS_ON command on startup. 04/04/19: added DXF (vector file) for the enclosure panels. 16/04/19: Wiring diagram updated v3.2 16/04/19: added steppers setup guide for others steppers brand/batches 17/04/19: updated Simplify3D profile v1.2 (added: M81 S1 end script) 17/04/19: added Neopixel wiring diagram (Beta) and Mimasx Code. 01/05/19: added STL panels for PanelDue 4.3 and MKS TFT32 V4 (not supported by duet) 10/05/19: fixed V6 locker by decreasing the fan screws holes to 2.7mm. 11/05/19: added E3D high temp 314x314 bed size 12/05/19: added quick frame wire holders (based on samella design and thing:2576237) 19/05/19: fixed typo - purge message box 24/05/19: added support for Ender-3 bed size 11/06/19: added Hotend and Heated bed PID tuning Quick guide 25/06/19: added picture that demonstrates how to flip the belts on the rear 01/07/19: added a link for all the screws kit 05/07/19: added wiring diagram for using 12v fans on a 24v system 21/07/19: added optional frame reinforcement for higher Z-axis builds 03/08/19: added New updated Neopixel code by Claus Noack - works! 03/08/19: added updated neopixel wiring version 2.2b 09/08/19: added Powerful twin 4010 blower fan option (layers fan) for Bowden and direct! 13/09/19: added step files for the new twin fans 04/09/20: added a new website for the project!!

Where to start?

1. Read, understand and prepare yourself Start with reading the Thing description and "more info links" section, watch the 3d animations, explore the printer 3D model with the 3d viewer, read the pages I linked in the "more info" sections and make sure you understand the printer structure.
1. Get the parts The waiting - is the most frustrating part. make sure you got all the needed parts. prepare spares of T-nuts, screws and so on. If you have decided to use your own electronics, make sure you know how to correctly configure the firmware of your board.
1. build now the building process begins.. Know that it isn't going to be easy as building a pre-made kit. Prepare all the tools you need and please use a good corner alignment tool, it is crucial to have a precise structure for excellent printing results. it is advised to use also the provided JIGS, the assembly will be much easier. Don't forget to tap holes on the corners and check if its an M5/M6 screw (depends on your extrusions manufacture). Take your time when fixing the rails to the extrusions. I found a good quick video tutorial made by 3D distributed: (youtube.com/watch?v=iX0U1ADH0MY) showing an easy way to align parallel rails. Don't forget to reward yourself after the rails installations - you deserve it :)
1. Electronics installation Install your Electronics carefully. Check your connections and wiring diagram closely and make sure everything hooked up correctly. don't make any shortcuts and use the right tools and parts. the Power cable should be the last thing to connect.
1. Software, Tests and Calibrations Update you DuetWifi board to the latest version and upload all the provided config to the sd-micro card, then insert it to your board and power up the system. make sure that the Mini IR sensor blinks 4 times right after powering the printer. please don't move the axis before checking endstop response. Try to home the printer - the printer should move to the left and then to the rear for the printer. if it isn't - check ou motors wiring and config. calibrate your Z height and check your sensors reading (temp). Please make sure to do a PID calibration for both the bed and the hotend sensors - This is very important. otherwise, your prints will fail. if everything looks good load filament and print a calibration cube and so on.
1. print Enjoy your printer and give her love when needed :) maintain your printer by greasing the rails with a Synthetic grease with PTFE or sewing machine oil. Keep the rails clean and the belts tight. Also, Clean your PEI build plate with alcohol after every print. If you are using the Air scrubber - please replace the HEPA filter when needed.
1. Post an "I made one" pictures Show the world your new 3D printer and be proud of your creation:) I would appreciate if you could please upload your new built 3D printers pics. Knowing that it helped you create your own 3D printer - for me, it's worth all the hard work and many hours that I spent in this project.
1. Remix & Share I am 100% sure that there are many ways to make this printer even better. this is why I gave you the source file of the Printer. Make it better by sharing your remixed and ideas with this awesome community:)

Those are the main resources you will need have:

a passion for 3D printing (most important)
Tools
Technical ability
spare time
budget (mid)

BOM - Bill Of Material

Notes:

Please Be precise and use the correct extrusions without shortcuts. using 2020 profile instead of 2040, may reduce the frame rigidity.
The BOM below is for 365mm Z height, If you wish to build a different size, then use the Calculator (excel file named: "BLV_mgn_Cube-Frame_calculator.xlsx" can be found at the project Zip file)
It is recommended to use normal extrusions with mgn rails and NOT V-slot.
Please let me know if you found any typo/mistake and I promise to fix it ASAP.
The Blurolls store from Aliexpress has started to offer a Kit for the project. It contains most of the needed electronics, frame, screws, pre-crimped wiring, panels, tube, brackets and more. I think its a pretty convenient solution, especially when part of the deal is genuine Hiwin rails!
New cheaper BLV mgn Cube (lite) kit based on SKR + tmc2209 spotted on Aliexpress.

Frame

Optional: recommended Frame Reinforcement for higher Z axis builds (465mm+):

Other

2 x T Shape Bracket 60x60
14 x Corner 90 degrees Angle Bracket for 2020/2040
100 x aluminum 2020 Brackets 20x20 \ 20x17

Getting the frame Kit: notice that you may be able to get a much cheaper price for the extrusions locally.

Screws and bracket kits:

Motion System

Rails

5 x Mgn12H Carriage + 400mm Rails (Use Frame calculator for other Z sizes)

Update: Thanks to Jerry.h now we have two good options for rails:

Set of cheaper rails for 17$ each (i bought it first).
Set of Hiwin rails which are the best rails exists on earth or Single Hiwin rail one of the biggest stores on Aliexpress are authorized Hiwin dealer and decided to offer a full kit of Hiwin rails for 38$ each rail. in my area ii sold 80$ for one rail. if you can afford it - That's a steal! even E3D chose to use Hiwin rails with their builds. (Notice: Hiwin rails should be tested with a load on the carriage)

Stepper Motors (Please ask them to give you a full D-cut shaft!)

2 x X/Y Stepper motor: 17HM19-2004S Nema17 0.9deg 46Ncm 2A
2 x Z stepper motors: 17HS19-2004S1 59Ncm 1.8deg 2A
1 x Extruder stepper motor: 17HS16-2004S1 Nema17 45Ncm 1.8deg 2A
2 x GT2 Pulley 16 Teeth 5mm bore / excellent GT2 pully 16 Teeth (for X/Y steppers)

Where to get the Steppers kit:

Motor Kit for BLV mgn Cube 3D printer The manufacturer agreed to offer a kit with all the necessary steppers. Please ask for a full D-cut shaft!
Moon motors kit for BLV project - high quality steppers
stepper kit for BLV mgn Cube - stepperonline store - not tested yet
Stepper motors kit from Blurolls store Note: ask for a full D-cut! or shave X/Y stepper's shaft with a Dremel/file (2 min work).

Belts system (check assembly section):

24 X F623 ZZ Flange Ball Bearings - number 2 or 3 option I recommend flipping the belts at the rear (check the belt system image), please do not use the geared GT2 16T. note: There is an Amazon seller who sells low-quality 623zz for triple the price!. his bearings are loose and it will ruin your printing experience.

Belts & Threaded rods

Main Electronics

1 x DuetWifi 32bit main board from Filastruder.com
1 x PanelDue 5" screen (not the "5i") OR save 80$ and use your phone/Tablet !
1 x Mini differential IR Auto leveling sensor / Mini differential IR height sensor
1 x Power Supply DC 24V 20A/30A - i use it / Meanwell PSU 24V 450W
2 x 3-Pin endstop switch KW11-3Z / Omron high quality endstop switches
1 x Heat Insulation 300mm for the bed
3 x NeoPixel Ring 16 leds WS2812 Module
1 x 5M Silicone Wire Flexible 14AWG Stranded Copper Cables black\red
1 x 22 awg wire 4\5 wires 5m
1 x 16mm Momentary switch with led 110V/220V (wall voltage)- power icon
2 x 16mm Momentary/locking latching switch with led 12/24V - optional
3 x best 4010 24V-2Pin DB Bearing OR Cheap fan 24V add 4 for small air Scrubber.
1 x 5015 Blower fan 24V ball bearings - 24V-2Pin DB Bearing
2 x 4010 blower fans (dual ball bearings) 24v - only for the new twin blower shield
1 x 24V to 12V 15A Step Down Converter(only if you got Anet E12 bed)
2 x 120mm fan 24V ball bearings 3000RPM (for the bigger Air Scrubber Note: Choose your PSU according to your specs

Hotend options - 4 options:

Note: For Triangelab hotend change the M305 raw in config.g file to this: "M305 P1 T100000 B4725 C0.0000000706 R4700" more info about it under the "Additional Notes" section on this page.

Hotend optional upgrades:

Heated bed system, choose one of the 2 choices:

Note: For those that prefer Duet clone:

Mechanics

Screws

note: Usually a large quantity of screws is sold in bulk so i rounded the quantities.

300 x M5 10mm Button Head Socket Cap Screw (buy at least 300~350)
2 x M5 16mm Button Head Socket Cap Screw
4 x M5 35mm Button Head Socket Cap Screw
200 x M5 washers
4 x M4 40mm Flat Head Machine Screw - only using CR-10 24V bed
2 x M4 30mm Hexagon head
78 x M3 8mm Socket Head Cap Screw (buy at least 100)
4 x M3 40mm Flat Head Machine Screw - only if using Anet E12 12V bed
2 x M3 50mm Socket Head Cap Screw
13 x M3 35mm Socket Head Cap Screw
2 x M3 30mm Socket Head Cap Screw
1 x M3 16mm Socket Head Cap Screw
5 x M3 16mm Socket Head Cap Screw - Only if NOT using Block cover
8 x M3 18mm Socket Head Cap Screw - Only if using the Block cover
3 x M3 25mm Phillips round head
1 x M3 22mm Phillips round head
4 x M3 40mm Socket Head Cap Screw
11 x M3 14mm Phillips round head
2 x M3 18mm Phillips round head
3 x M3 25mm Socket Head Cap Screw
2 x M3 10mm Socket Head Cap Screw
8 x M3 22mm Socket Head Cap Screw
8 x M3 12mm Socket Head Cap Screw
4 x M2.5 12mm Flat Head Machine Screw
283 x M5 T-nut (buy at least 300)
2 x M4 Nut
40 x M3 T-nut
62 x M3 0.5mm Washer (put 2pcs of 0.5mm or one of 1mm washer) (buy at least 100)
26 x M3 Nut (buy at least 50)
16 x M3 Nyloc

Links To kits that can be useful:

Optional and others

easy fast wires connectors
1M Corrugated tube
optional: Mayitr Black Wrap Braided Cable Sleeve Wear Resistant like prusa
solid state relay SSR-25DA to turn ON the printer with button
SSR Heatsink
optional: DC step-down module LM2596 (if you are going to use 12V fans/ Led strip)
5M LED strip 5050 60leds/m 44key waterproof
Wago Compact Wiring Connector
activated carbon filter (for the bigger air scrubber)

500pcs replacment 3/32'' G10 Hardened Precision Steel balls for mgn12H rails
100K NTC 3950 Thermistors (replacment if broken)
Hepa Filter for ilife vacuum robots for the smaller air scrubber
Hepa Filter for eufy robovac 11c for the bigger air scrubber
Soundproofing Foam Acoustic Sound Absorption Tile
Brass brush for Hotend cleaner

The filaments i used :

NOULEI Silk Filaments | link2

Walls / enclosure

How i created the walls / semi-enclosure?

Well, it's cheap and very easy.. You can choose one of those options:

4mm Cardboard sheets (cheap)
KAPA foam boards (cheap)
aluminum composite panel
4mm Plywood sheets

Then apply this adorable Carbon Fiber Vinyl on the board. you can use M3/M5 screws to secure the board to the panels.

Tools

MUST have: 90 Degree Corner Clamps if you want a good printing results.
Cable Cutter
SN-28B dupont Crimping Tool
Tapping Kit M3,M4,M5,M6 - mainly for the corners holes
PTFE Tube Cutter
Set Wire Copper Terminal
10 pairs JST Plug Male to Female Wire Connector for Dupont wires.
dehumidifier (moisture absorb) for your dry box The best i have tested in my drybox.
Stainless Steel Digital Caliper
Set Dupont Wire Jumper Pin Header Connector Housing Kit Male
Cable Organizer
TS100 Soldering iron (my favorite)
Belt Tension Meter/gauge - 3d Printed tool

What & How to print

All the parts were designed to be easily printed and most of them would not require support. in order to make it more convenient I added two tools that can help you decide how to print the parts:

1. Print Orientation guide - The image below visualize exactly how you should place all the parts on the build plate. Some of the parts will require support such as the Tensioner idler holder, so pay attention before hitting the start print button. you may notice that on some of the parts has text such as: X90, Y-90.. its the rotation value in order to set the part on the build plate correctly.
PDF fils/Images - down below you will find a few sketches of the main components. Each part has his name on with the recommended infill percentage and material to print with.

Common print settings: Personally, I would recommend printing all the parts with PETG, especially with parts that located in hot areas (heated bed, hotend..). Using at least: 3 or more walls/outer parameters 3 or more top/bottom layers and the recommended infill/material suggested below.

Special Thanks to:

I want to give heartfelt thanks to my lovely wife for encouraging and supporting me throughout the project.
Huge thanks and appreciation for Tim from Filastruder.com for supporting this project and many more! (you can read more about it here)
This great community for making this place my second home :) Thank you!

Tip ======== There are no conditions other than the license terms. You don't have to, but if you insist a small donation will be greatly appreciated.

Thank you :)

Thingiverse

BLV mgn Cube - 3d printer

BLV

8,520

Curtidas

Downloads

8,700

Coleções

Impressões