Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A build plate of various optical components: (1) an XY-stage (2) a linear rail for translation (3) some caps/holders (4) mounts for rails, stages, etc. (5) base mounting plates
The ultimate goal for these components is to enable a printable compound microscope.
Instruções
Most parts have 4-40 cap bolt holes, which self-thread, for either positioning (for the XY-stage) or as set screws (for the rail and mounts)
The linear rail can be stacked end-on with two other rails by joining them (with some 4-40 bolts) on a common base plate. The base plate does have trouble printing at low infill.
The XY-stage uses four thin, S-springs at the corners which will bind up at the extremes of the translation... you can get about +/-5mm with the current design, but some diagonal positions require "convincing".
The cuvette and cap included in this build plate are from http://www.thingiverse.com/thing:33638
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta