Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Pixel yard stake por didjareally no Thingiverse

Descrição

Yard stake designed after the quick becoming famous "Peace family stakes" in a 3d printed format. Choose your spacing and your pixel count that suits your needs. Piece that holds the pixels has nubbins to hold the pixels in place just like Keith Hoyle's snowflake design. The stake tool is used to push the stake into the ground by sliding over the mounting peg and allowing pressure to be made onto the main part of the stake instead. Once the stake is inserted into the ground, then slide the pixel holder onto the stake and bolt into place using a M4 x 25mm bolt, M4 wingnut(for faster, less tool assembly), and M4 washers.

Thingiverse

Pixel yard stake

didjareally didjareally (abre em nova aba)
69
Curtidas
0
Downloads
202
Coleções
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (10)
stake_tool.stl 151.9 KB
yard_stake.stl 28.7 KB
yard_stake_1_inch_spacing.stl 248.9 KB
yard_stake_2_inch_spacing.stl 248.8 KB
yard_stake_3_inch_spacing.stl 250.1 KB
yard_stake_3_inch_spacing_5_pixels.stl 213.6 KB
yard_stake_1_inch_spacing_5_pixels.stl 213.8 KB
yard_stake_2_inch_spacing_5_pixels.stl 213.9 KB
yard_stake_1_inch_spacing_10_pixels.stl 394 KB
yard_stake_1_inch_spacing_6_pixel_1_2_rebar.stl 250.5 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora