Housing with Mountingpoints for Lerdge Display V1.0.2. (as provided with Lerdge-X or Lerdge-K 3D Printer-Board).

VERSION 2 released, adding some inserting Nuts for better screwing correction (1mm) the position of the encoder hole

NEW Mount Bracket 2018-12-31

choose one of three front cover shell designs (red, yellow or green) and the rear cover shell (blue).

without or with fitted rotary encoder.

A small gap between display surface and the frame is intended

Also needed:

• 6 pcs. Screws M3 x 10mm or selftapping (fixes the shells and display)
• some washers.
• Version 2 also needed 6 pcs. curled inserting nut M3 x 5 x 5

Optional for Mounting at the side bores:

• 4 pcs. curled inserting nut M3 x 5 x 5
• 4 pcs. Screws M3 (length as needed) .
• maybe some washers. or:
• 2 pcs. M3 Nuts / T-Slot Nuts with M3 thread for mount directly on the extrusion.
• 2 pcs. Screws M3 (length as needed).
• maybe some washers

You can get the Curled Inserting Nuts for example from Amazon: https://www.amazon.de/Sourcingmap-R%C3%A4ndelmuttern-Messing-Gewindegr%C3%B6%C3%9Fe-St%C3%BCck/dp/B01BHDGT4O/ref=sr_1_8?ie=UTF8&qid=1546090145&sr=8-8&keywords=r%C3%A4ndelmutter+m3+x5+x5